Tools & Hardware

Custom S&S Coupler / Pedal Wrench – Standard or Long Length – Lightweight Titanium Option

Fits S&S Couplers from 1-3/8 to 2″ diameter frame tubes.
With pedal wrench, and 8mm box/hex for extra leverage for your pedal hex key.
Standard size also has 4mm, 5mm, 6mm, 1/4″, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, & 15mm box hex wrenches. This also saves weight.
Standard length is almost 2″ longer than the standard S&S wrench, for more leverage.
Standard length can be used with a 4mm Allen wrench to adjust your eccentrics.
Standard length also available in Titanium. Half the weight.
Long Wrench for shop use, or if you struggle getting the couples tight enough with the standard length.

Finish Line Extreme Fluoro 20g Syringe – This is the Grease to use on your S&S Couplers

Out of stock

Double Freewheel Block (DFB) Tool

Lockring Wrench

This wrench fits the intermediate shaft body lockring (the third bottom bracket that has the bearings in it) and the lockring that holds the chainrings on the spline drive, on tandems with three, two, or one chainrings.

Park Pin Spanner Wrench
Used for adjusting the eccentrics to adjust for timing chain wear, install or remove self- extracting crank bolts, and servicing White Industries freewheels.

Quick Link Tire Lever
These clever tire levers are also quick link chain pliers to easily take apart your quick link.

Park 3-Way Wrench – A must have tool for any home mechanic
AWS-1 (4mm, 5mm, 6mm) $10
or  AWS-7C (4mm, 5mm, Torx 25) $11

Park BBT-22 Bottom Bracket Tool
Fits the our tandems and the bottom brackets we sell (Shimano 20 tooth spline standard).

Self Extracting Cranks Bolts for square taper bottom brackets (8mm)

Long Handle 8mm Hex Key Wrench. Very handy for self extracting crank bolts.