Replacement, Spare, and Maintenance Items

Maintenance Items
E-Bike strength chains long enough for the right rear final drive. These chains hold up better than most.

9 Speed chain. KMC X9.93 in custom lengths w/Quick Link
Measure your chain to be sure you order the correct length

Replacement 34 tooth Spider/Chainring or other spiders- These replacement spiders, or spider/chainring only fits da Vinci cranks.

da Vinci Drive Chainrings
Replacement chainrings for the right side of the Intermediate Shaft

Coming soon

18, 24 tooth (out or 12 and 30)”>18, 24 tooth (out or 12 and 30) $12.00

18, 24t with conical spacers”>18, 24t with conical spacers $49.00

13, 21, 28 tooth”>13, 21, 28 tooth $45.00

13, 21, 28t with conical spacers”>13, 21, 28t with conical spacers $90.00

13, 21, 28t w/conical spacers & lockring”>13, 21, 28t w/conical spacers & lockring $107.00

18, 26t (For double ring drivetrains)”>18, 26t (For double ring drivetrains) $40.00

18, 26t w/conical spacer”>18, 26t w/conical spacer $65.00

Replacement Intermediate Shaft Bearings (Need 2 or 3 per bike) 6903 2RS sealed cartridge bearings.

Custom S&S Coupler / Pedal Wrench – Standard or Long Length – Lightweight Titanium Option

Fits S&S Couplers from 1-3/8 to 2″ diameter frame tubes.
With pedal wrench, and 8mm box/hex for extra leverage for your pedal hex key.
Standard size also has 4mm, 5mm, 6mm, 1/4″, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, & 15mm box hex wrenches. This also saves weight.
Standard length is almost 2″ longer than the standard S&S wrench, for more leverage.
Standard length can be used with a 4mm Allen wrench to adjust your eccentrics.
Standard length also available in Titanium. Half the weight.
Long Wrench for shop use, or if you struggle getting the couples tight enough with the standard length.

Finish Line Extreme Fluoro 20g Syringe – This is the Grease to use on your S&S Couplers

Out of stock

Soon to be added: Freewheels